Specifications

B-470
Cisco MWR 2941 Mobile Wireless Edge Router Software Configuration Guide, Release 12.2(33)MRB
OL-21227-02
Appendix B Cisco MWR 2941 Router Command Reference
show ethernet cfm statistics
show ethernet cfm statistics
To display Ethernet connectivity fault management (CFM) information, use the show ethernet cfm
statistics command in privileged EXEC mode.
show ethernet cfm statistics [domain [domain-name [service {ma-name | ma-num | vlan-id
vlan-id | vpn-id vpn-id}]] | mpid mpid]
Syntax Description
Command Default All domains are displayed when none of the keywords or arguments are selected.
Command Modes Privileged EXEC (#)
Command History
Usage Guidelines Use this command to display an overview of transmitted and received messages.
If a domain name has more than 43 characters, a warning message is displayed notifying that the
maintenance domain ID (MDID) is truncated to 43 characters in continuity check messages (CCMs) if
“id <fmt> <MDID>” is not configured.
Examples Following is sample output from a show ethernet cfm statistics command:
Router# show ethernet cfm statistics
BRAIN MAC: aabb.cc03.b999
DomainName: Domain_L7
MA Name: cust_700_l7
domain (Optional) Configures a maintenance domain.
domain-name (Optional) String of a maximum of 154 characters.
service (Optional) Configures a maintenance association within the domain.
ma-name (Optional) String that identifies the maintenance association.
ma-num (Optional) Integer that identifies the maintenance association.
vlan-id (Optional) Configures a VLAN.
vlan-id (Optional) Integer from 1 to 4094 that identifies the VLAN.
vpn-id (Optional) Configures a virtual private network (VPN).
vpn-id (Optional) Integer from 1 to 32767 that identifies the VPN.
mpid (Optional) Configures a maintenance point identifier.
mpid (Optional) Integer from 1 to 8191 that identifies the maintenance point.
Release Modification
12.2(33)SXI2 This command was introduced.
12.2(33)MRA This command was integrated into Cisco IOS Release 12.2(33)MRA.