Specifications

B-467
Cisco MWR 2941 Mobile Wireless Edge Router Software Configuration Guide, Release 12.2(33)MRB
OL-21227-02
Appendix B Cisco MWR 2941 Router Command Reference
show ethernet cfm maintenance-points remote detail
show ethernet cfm maintenance-points remote detail
To display information about a remote maintenance point in the continuity check database, use the show
ethernet cfm maintenance-points remote detail command in privileged EXEC mode.
Note Release 12.2(33)MRA supports the Draft 1.0 version of Ethernet CFM; it does not support the IEEE
802.1ag-2007 version.
Cisco pre-Standard Connectivity Fault Management Draft 1 (CFM D1)
show ethernet cfm maintenance-points remote detail {mac mac-address | mpid id} [domain
domain-name | level level-id] [service service-name | vlan vlan-id]
CFM IEEE 802.1ag Standard (CFM IEEE)
show ethernet cfm maintenance-points remote detail {mac mac-address | mpid id} [domain
domain-name [port | vlan vlan-id]]
Syntax Description
Command Default When no options are specified, all remote maintenance endpoints (MEPs) matching the specified MAC
address or maintenance point ID (MPID) are displayed.
Command Modes Privileged EXEC (#)
mac Shows a remote MAC address.
mac-address MAC address of the remote maintenance point, in the format
abcd.abcd.abcd.
mpid Shows a remote maintenance point.
id Integer from 0 to 8191 that identifies the maintenance point.
domain (Optional) Shows a specific maintenance domain.
domain-name (Optional) String of a maximum of 154 characters.
level (Optional) Shows a specific maintenance level.
level-id (Optional) Integer from 0 to 7 that identifies the maintenance level.
service (Optional) Shows a customer service instance.
service-name (Optional) String that identifies the service instance.
port (Optional) Shows the operational state of the port MEP.
vlan (Optional) Shows a VLAN configuration.
vlan-id (Optional) Integer from 1 to 4094 that identifies the VLAN.