Specifications

B-463
Cisco MWR 2941 Mobile Wireless Edge Router Software Configuration Guide, Release 12.2(33)MRB
OL-21227-02
Appendix B Cisco MWR 2941 Router Command Reference
show ethernet cfm maintenance-points remote
Usage Guidelines If a domain name has more than 43 characters, a warning message is displayed notifying that the
maintenance domain ID (MDID) is truncated to 43 characters in continuity check messages (CCMs) if
“id <fmt> <MDID>” is not configured.
When no maintenance domain is specified, all entries are displayed; otherwise only entries belonging to
the specified domain or level (CFM D1 only) are shown.
Examples The following example shows output from a show ethernet cfm maintenance-points remote
command:
Router# show ethernet cfm maintenance-points remote
--------------------------------------------------------------------------------
MPID Domain Name MacAddress IfSt PtSt
Lvl Domain ID Ingress
RDI MA Name Type Id SrvcInst
EVC Name Age
--------------------------------------------------------------------------------
37 Domain_port aabb.cc03.ba00 Up N/A
0 Domain_port Et0/0
- portmep Port none N/A
N/A 1s
401 Domain_L5 aabb.cc03.bb99 Up Up
5 Domain_L5 Et0/0.9
- cust_500_l5 Vlan 9 N/A
N/A 2s
301 Domain_L7 aabb.cc03.bb99 Up Up
7 Domain_L7 Et0/0.11
- cust_700_l7 Vlan 11 N/A
N/A 0s
Total Remote MEPs: 3
Table 23 describes the significant fields shown in the display.
12.2(33)SXI2 This command was integrated into Cisco IOS Release 12.2(33)SXI2.
12.2(33)MRA This command was integrated into Cisco IOS Release 12.2(33)MRA.
Release Modification
Table 23 show ethernet cfm maintenance-points remote Field Descriptions
Field Description
MPID Identifier of the MEP.
Lvl Maintenance level.
RDI Remote defect indication (RDI) messages on the
maintenance point.
Domain Name Name of the domain.
Domain ID MAC address of the MEP.
MA Name Name of the maintenance association.
EVC Name Identifier of the Ethernet virtual circuit (EVC).
Mac Address MAC address of the MEP.