Specifications

B-462

Cisco MWR 2941 Mobile Wireless Edge Router Software Configuration Guide, Release 12.2(33)MRB

OL-21227-02

Appendix B Cisco MWR 2941 Router Command Reference

show ethernet cfm maintenance-points remote

To display detailed information about remote maintenance endpoints (MEPs) configured statically in the

MEP list and their status in the continuity check database (CCDB), use the show ethernet cfm

maintenance-points remote command in privileged EXEC mode.

Note Release 12.2(33)MRA supports the Draft 1.0 version of Ethernet CFM; it does not support the IEEE

802.1ag-2007 version.

Cisco pre-Standard Ethernet Connectivity Fault Management Draft 1 (CFM D1)

show ethernet cfm maintenance-points remote [domain domain-name | level level-id]

CFM IEEE 802.1ag Standard (CFM IEEE)

show ethernet cfm maintenance-points remote [domain domain-name | [[crosscheck | static]

[domain domain-name | mpid mpid [domain domain-name]] [port | vlan vlan-id]]]

Syntax Description

Command Default When neither a domain nor a level (CFM D1 only) is specified, all CCDB MEP entries are displayed.

Command Modes Privileged EXEC (#)

Command History

domain (Optional) Indicates that a maintenance domain is specified.

domain-name (Optional) String of a maximum of 154 characters.

level (Optional) Indicates that a maintenance level is specified.

level-id (Optional) Integer from 0 to 7 that identifies the maintenance level.

crosscheck (Optional) Shows the Mep-Up status from the D1 crosscheck function.

static (Optional) Shows the Mep-Up status from the continuity-check static rmep

function.

mpid (Optional) Shows a remote maintenance point.

mpid (Optional) Integer from 0 to 8191 that identifies the maintenance point.

port (Optional) Shows the operational state of the port MEP.

vlan (Optional) Shows a VLAN configuration.

vlan-id (Optional) Integer from 1 to 4094 that identifies the VLAN.

Release Modification

12.2(33)SRA This command was introduced.

12.4(11)T This command was integrated into Cisco IOS Release 12.4(11)T.

12.2(33)SRB The output of this command was enhanced to include the port state values of

REMOTE_EE, LOCAL_EE, and TEST.

12.2(33)SXH This command was integrated into Cisco IOS Release 12.2(33)SXH.