Specifications

B-460
Cisco MWR 2941 Mobile Wireless Edge Router Software Configuration Guide, Release 12.2(33)MRB
OL-21227-02
Appendix B Cisco MWR 2941 Router Command Reference
show ethernet cfm maintenance-points local
• On a particular interface belonging to a given domain
• Belonging to a given domain independent of interface
The display may also be restricted to either MEPs or MIPs.
If a domain name has more than 43 characters, a warning message is displayed notifying that the
maintenance domain ID (MDID) is truncated to 43 characters in continuity check messages (CCMs) if
“id <fmt> <MDID>” is not configured.
Examples Following is sample output from a show ethernet cfm maintenance-points local detail command
when none of the other optional keywords and arguments are specified:
Router# show ethernet cfm maintenance-points local detail
Local MEPs:
--------------------------------------------------------------------------------
MPID Domain Name Lvl MacAddress Type CC
Domain Id Dir Port Id
MA Name SrvcInst
EVC name
--------------------------------------------------------------------------------
301 Domain_L7 7 aabb.cc03.bb99 Vlan Y
Domain_L7 Up Et0/1 11
cust_700_l7 N/A
N/A
401 Domain_L5 5 aabb.cc03.bb99 Vlan Y
Domain_L5 Up Et0/1 9
cust_500_l5 N/A
N/A
Total Local MEPs: 2
Local MIPs: None
Table 22 describes the significant fields shown in the display.
Table 22 show ethernet cfm maintenance-points local Field Descriptions
Field Description
MPID Identifier of the maintenance point.
Domain Name Name of the domain.
Lvl Maintenance level where the maintenance point is
configured.
MacAddress MAC address of the maintenance point.
Type Type of MEP (VLAN or port MEP)
CC Continuity check operational status.
Domain Id Identifier of the domain.
Dir Direction which the maintenance point is facing.
Port Port MEP.
Id Identifier of the VLAN.
MA Name Name of the maintenance association.