Specifications

B-436
Cisco MWR 2941 Mobile Wireless Edge Router Software Configuration Guide, Release 12.2(33)MRB
OL-21227-02
Appendix B Cisco MWR 2941 Router Command Reference
show connection
Examples The following example shows the local interworking connections on a router:
Router# show connection
ID Name Segment 1 Segment 2 State
========================================================================
1 conn1 ATM 1/0/0 AAL5 0/100 ATM 2/0/0 AAL5 0/100 UP
2 conn2 ATM 2/0/0 AAL5 0/300 Serial0/1 16 UP
3 conn3 ATM 2/0/0 AAL5 0/400 FA 0/0.1 10 UP
4 conn4 ATM 1/0/0 CELL 0/500 ATM 2/0/0 CELL 0/500 UP
5 conn5 ATM 1/0/0 CELL 100 ATM 2/0/0 CELL 100 UP
Table B-16 describes the significant fields shown in the display.
Related Commands
Table B-16 show connection Field Descriptions
Field Description
ID Arbitrary connection identifier assigned by the operating system.
Name Name of the connection.
Segment 1
Segment 2
Information about the interworking segments, including:
• Interface name and number.
• Segment state, interface name and number, and channel ID.
Segment state displays nothing if the segment state is UP, “-” if
the segment state is DOWN, and “***Card Removed***” if the
segment state is DETACHED.
• Type of encapsulation (if any) assigned to the interface.
• Permanent virtual circuit (PVC) assigned to the ATM interface,
data-link connection identifier (DLCI) assigned to the serial
interface, or VLAN ID assigned to the Ethernet interface.
State or Status Status of the connection, which is one of the following: INVALID,
UP, ADMIN UP, ADMIN DOWN, OPER DOWN, COMING UP,
NOT VERIFIED, ERR.
Command Description
show atm pvc Displays the status of ATM PVCs and SVCs.
show frame-relay pvc Displays the status of Frame Relay interfaces.