Specifications

B-348
Cisco MWR 2941 Mobile Wireless Edge Router Software Configuration Guide, Release 12.2(33)MRB
OL-21227-02
Appendix B Cisco MWR 2941 Router Command Reference
recovered-clock slave
recovered-clock slave
To configure out-of-band clock recovery, use the recovered-clock slave command. This command
automatically creates a virtual-cem interface. To access the virtual-cem interface, use the command
interface virtual-cem 0/24. To disable this feature, use the feature, use the no form of this command.
recovered-clock slave
no recovered-clock slave
Syntax Description This command has no arguments or keywords.
Command Default There is no default setting.
Command Modes Global configuration
Command History
Examples The following example shows how to use the recovered-clock slave command and how to configure the
virtual-cem interface:
Router# config t
Router(config)# recovered-clock slave
Router(config-if)# interface virtual-cem 0/24
Router(config-if)# payload-size 486
Router(config-if)# cem 0
Router(config-if)# xconnect 10.10.10.2 7600 encap mpls
Router(config-if)# exit
Router(config)# exit
Related Commands
Release Modification
12.4(19)MR2 This command was introduced.
12.2(33)MRA This command was integrated into Cisco IOS Release 12.2(33)MRA.
Command Description
recovered-clock recovered Configures adaptive clock recovery.