Specifications

B-300

Cisco MWR 2941 Mobile Wireless Edge Router Software Configuration Guide, Release 12.2(33)MRB

OL-21227-02

Appendix B Cisco MWR 2941 Router Command Reference

ptp enable

Enables PTP clocking on an interface.

ptp enable

no ptp enable

Syntax Description This command has no arguments or keywords.

Command Default PTP is disabled by default.

Command Modes Interface configuration

Command History

Usage Guidelines You can apply this command to multiple interfaces.

Examples The following example shows how to configure a PTP announcement:

Router# config t

Router(config)# interface vlan 10

Router(config-if)# ptp enable

Router(config-if)# exit

Router(config)# exit

Related Commands

Release Modification

12.4(19)MR2 This command was introduced.

12.2(33)MRA This command was integrated into Cisco IOS Release 12.2(33)MRA.

Command Description

ptp master Sets an interface in master clock mode for PTP clocking

ptp mode Specifies the PTP mode.

ptp slave Sets an interface to slave clock mode for PTP clocking.