Specifications

B-295
Cisco MWR 2941 Mobile Wireless Edge Router Software Configuration Guide, Release 12.2(33)MRB
OL-21227-02
Appendix B Cisco MWR 2941 Router Command Reference
ptp delay-req interval
ptp delay-req interval
Specifies the delay request interval, the time recommended to member devices to send delay request
messages when an interface is in PTP master mode.
ptp delay-req interval [interval-value]
no ptp delay-req interval [interval-value]
Syntax Description
Command Default This command is disabled by default.
Command Modes Interface configuration
Command History
Usage Guidelines The recommended interval value is -6.
interval Specifies an interval for PTP delay requests.
interval-value Specifies the length of the interval for delay request messages. The intervals
are set using log base 2 values, as follows:
4—1 packet every 16 seconds
3—1 packet every 8 seconds
2—1 packet every 4 seconds
1—1 packet every 2 seconds
0—1 packet every second
–1—1 packet every 1/2 second, or 2 packets per second
–2—1 packet every 1/4 second, or 4 packets per second
–3—1 packet every 1/8 second, or 8 packets per second
–4—1 packet every 1/16 seconds, or 16 packets per second.
–5—1 packet every 1/32 seconds, or 32 packets per second.
–6—1 packet every 1/64 seconds, or 64 packets per second.
The recommended value is –6.
Release Modification
12.4(20)MR This command was introduced.
12.2(33)MRA This command was integrated into Cisco IOS Release 12.2(33)MRA.