Specifications

B-287
Cisco MWR 2941 Mobile Wireless Edge Router Software Configuration Guide, Release 12.2(33)MRB
OL-21227-02
Appendix B Cisco MWR 2941 Router Command Reference
protocol (ATM)
• Enable the router to accept InARP reply when the peer router's IP address is not in the same subnet
as the receiving sub-interface on which the PVC is configured.
• Does not provide support for SVC, PVC, and SVC bundles.
PVC range and PVC-in-range configuration modes support only IP.
Examples In the following example, the router creates a static map on a VC, indicates that 10.68.34.237 is
connected to this VC, and sends ATM pseudobroadcasts:
protocol ip 10.68.34.237 broadcast
In the following example, the router removes a static map from a VC and restores the default behavior
for Inverse ARP (refer to the “Defaults” section):
no protocol ip 10.68.34.237
In the following example, the VC carries PPP traffic and its associated parameters:
protocol ppp 10.68.34.237 virtual-template