Specifications
B-214
Cisco MWR 2941 Mobile Wireless Edge Router Software Configuration Guide, Release 12.2(33)MRB
OL-21227-02
Appendix B Cisco MWR 2941 Router Command Reference
mdt data
mdt data
To configure the multicast group address range for data multicast distribution tree (MDT) groups, use
the mdt data command in VRF configuration mode. To disable this function, use the no form of this
command.
mdt data group-address-range wildcard-bits [threshold threshold-value] [list access-list]
no mdt data group-address-range wildcard-bits [threshold threshold-value] [list access-list]
Syntax Description
Command Default The command is disabled.
Command Modes VRF configuration
Command History
Usage Guidelines A data MDT group can include a maximum of 256 multicast groups per Virtual Private Network (VPN).
Multicast groups used to create the data MDT group are dynamically chosen from a pool of configured
IP addresses.
This command configures a range of alternative multicast destination addresses for the tunnel header.
The destination address chosen depends on the traffic profile (that is, the source and destination match
the specified access list and the rate of the traffic has exceeded the bandwidth threshhold value).
group-address-range Multicast group address range. The range is from 224.0.0.1 to
239.255.255.255.
wildcard-bits Wildcard bits to be applied to the multicast group address range.
threshold threshold-value (Optional) Defines the bandwidth threshold value. The range is from 1
through 4294967.
list access-list (Optional) Defines the access list name or number.
Release Modification
12.0(23)S This command was introduced.
12.2(13)T This command was integrated into Cisco IOS Release 12.2(13)T.
12.2(14)S This command was integrated into Cisco IOS Release 12.2(14)S.
12.2(18)SXE Support for this command was introduced on the Supervisor Engine 720.
12.2(27)SBC This command was integrated into Cisco IOS Release 12.2(27)SBC.
12.2(33)SRA This command was integrated into Cisco IOS Release 12.2(33)SRA.
12.2SX This command is supported in the Cisco IOS Release 12.2SX train. Support
in a specific 12.2SX release of this train depends on your feature set,
platform, and platform hardware.
12.2(33)MRB This command was integrated into Cisco IOS Release 12.2(33)MRB.