Specifications

B-204
Cisco MWR 2941 Mobile Wireless Edge Router Software Configuration Guide, Release 12.2(33)MRB
OL-21227-02
Appendix B Cisco MWR 2941 Router Command Reference
match mpls experimental
match mpls experimental
To configure a class map to use the specified value or values of the experimental (EXP) field as a match
criteria, use the match mpls experimental command in class-map configuration mode. To remove the
EXP field match criteria from a class map, use the no form of this command.
match mpls experimental number
no match mpls experimental number
Syntax Description
Command Default No match criteria are specified.
Command Modes Class-map configuration
Command History
Usage Guidelines For class-based weighted fair queueing (CBWFQ), you define traffic classes based on match criteria
such as input interfaces, access control lists (ACLs), protocols, quality of service (QoS) labels, and
experimental (EXP) field values. Packets satisfying the match criteria for a class constitute the traffic
for that class.
The match mpls experimental command specifies the name of an EXP field value to be used as the
match criterion against which packets are compared to determine if they belong to the class specified by
the class map.
number EXP field value (any number from 0 through 7) to be used as a match
criterion. You can specify multiple values, separated by a space (for
example, 3 4 7).
Release Modification
12.0(7)XE1 This command was introduced.
12.1(1)E This command was integrated into Cisco IOS Release 12.1(1)E.
12.1(5)T This command was integrated into Cisco IOS Release 12.1(5)T.
12.2(4)T This command was implemented on the Cisco MGX 8850 switch and the
MGX 8950 switch with a Cisco MGX RPM-PR card.
12.2(4)T2 This command was implemented on the Cisco 7500 series.
12.2(33)SRA This command was integrated into Cisco IOS Release 12.2(33)SRA.
12.2(31)SB This command was integrated into Cisco IOS Release 12.2(31)SB and
implemented on the Cisco 10000 series.
12.2SX This command is supported in the Cisco IOS Release 12.2SX train. Support
in a specific 12.2SX release of this train depends on your feature set,
platform, and platform hardware.
12.4(20)MR This command was integrated into Cisco IOS Release 12.4(20)MR.
12.2(33)MRA This command was integrated into Cisco IOS Release 12.2(33)MRA.