Specifications

B-185

Cisco MWR 2941 Mobile Wireless Edge Router Software Configuration Guide, Release 12.2(33)MRB

OL-21227-02

Appendix B Cisco MWR 2941 Router Command Reference

ip pim send-rp-discovery

To configure the router to be a rendezvous point (RP) mapping agent, use the ip pim send-rp-discovery

command in global configuration mode. To deconfigure the router from functioning as the RP mapping

agent, use the no form of this command.

ip pim [vrf vrf-name] send-rp-discovery [interface-type interface-number] scope ttl-value

no ip pim [vrf vrf-name] send-rp-discovery

Syntax Description

Command Default The router is not configured to be an RP mapping agent.

Command Modes Global configuration

Command History

vrf vrf-name (Optional) Configures the router to be an RP mapping agent for the specified

Multicast Virtual Private Network (VPN) routing and forwarding (MVRF)

instance.

interface-type

interface-number

(Optional) Interface type and number that is to be used as the source address of

the RP mapping agent.

scope ttl-value Specifies the time-to-live (TTL) value for Auto-RP discovery messages. The

range is from 1 to 255.

Release Modification

11.1 This command was introduced.

12.0(23)S The vrf keyword and vrf-name argument were added.

12.2(13)T The vrf keyword and vrf-name argument were added.

12.2(14)S This command was integrated into Cisco IOS Release 12.2(14)S.

12.2(18)SXE Support for this command was introduced on the Supervisor Engine 720.

12.2(27)SBC This command was integrated into Cisco IOS Release 12.2(27)SBC.

12.2(33)SRA This command was integrated into Cisco IOS Release 12.2(33)SRA.

12.4(8) The interval keyword and seconds argument were added.

12.4(9)T The interval keyword and seconds argument were added.

12.2(33)SRB The interval keyword and seconds argument were added.

12.2(18)SXF11 The interval keyword and seconds argument were added.

12.2(33)MRB This command was integrated into Cisco IOS Release 12.2(33)MRB. This

release does not support the interval keyword.