Specifications

B-156
Cisco MWR 2941 Mobile Wireless Edge Router Software Configuration Guide, Release 12.2(33)MRB
OL-21227-02
Appendix B Cisco MWR 2941 Router Command Reference
ip igmp static-group
ip igmp static-group
To configure static group membership entries on an interface, use the ip igmp static-group command
in interface configuration mode. To delete static group membership entries, use the no form of this
command.
ip igmp static-group {group-address [source {source-address]}
no ip igmp static-group {group-address [source {source-address]}
Syntax Description
Command Default No static group membership entries are configured on interfaces.
Command Modes Interface configuration (config-if)
Command History
Usage Guidelines Use the ip igmp static-group command to configure static group membership entries on an interface.
When you configure the ip igmp static-group command, packets to the group are fast-switched out the
interface, provided that packets were received on the correct reverse path forwarding (RPF) interface.
Once configured, static group membership entries are added to the IGMP cache and mroute table.
group-address IP multicast group address to configure as a static group member on the
interface.
source (Optional) Statically forwards a (S, G) channel out of the interface.
source-address (Optional) IP address of a system where multicast data packets originate.
Release Modification
11.2 This command was introduced.
12.3(2)T This command was modified. The ssm-map keyword was added.
12.2(18)S This command was modified. The ssm-map keyword was added.
12.2(18)SXD3 This command was integrated into Cisco IOS Release 12.2(18)SXD3.
12.2(27)SBC This command was integrated into Cisco IOS Release 12.2(27)SBC.
12.2(18)SXF5 This command was modified. The class-map keyword and class-map-name
argument were added.
15.0(1)M This command was modified. The class-map keyword and class-map-name
argument were added.
12.2(33)SRE This command was modified. The class-map keyword and class-map-name
argument were added.
Cisco IOS XE
Release 2.6
This command was integrated into Cisco IOS XE Release 2.6.
12.2(33)MRB This command was integrated into Cisco IOS Release 12.2(33)MRB. This
release does not support the *, ssm-map, and class-map keywords.