Specifications

B-91
Cisco MWR 2941 Mobile Wireless Edge Router Software Configuration Guide, Release 12.2(33)MRB
OL-21227-02
Appendix B Cisco MWR 2941 Router Command Reference
ethernet cfm cc enable level vlan
Usage Guidelines Use the ethernet cfm cc enable level vlan command to enable transmission of CCMs in one of the
following ways:
• Globally (per device)
• For a particular level
• For a particular VLAN
• For a combination of level and VLAN
The syntax of the ethernet cfm cc enable level vlan command as entered in the CLI and the format of
the command as shown in the configuration can be different. For example, if you enter:
Router(config)# ethernet cfm cc enable level 1,2,3,4,5 vlan 100,101,102,103,105
The configuration shows the following:
ethernet cfm cc enable level 1-5 vlan 100-103,105
To shorten the length of the command, you enter the command in the second format.
Examples The following examples show how this command functions:
The command already configured is:
ethernet cfm cc enable level 1-5 vlan 100-200
You configure this new command:
Router(config)# no ethernet cfm cc enable level 2-3 vlan 50-150
The following commands are generated as a result of the command you have just configured. Note that
these commands are different from the command you entered.
ethernet cfm cc enable level 1,4-5 vlan 100-200
ethernet cfm cc enable level 2-3 vlan 151-200