Specifications

B-83
Cisco MWR 2941 Mobile Wireless Edge Router Software Configuration Guide, Release 12.2(33)MRB
OL-21227-02
Appendix B Cisco MWR 2941 Router Command Reference
dscp
Usage Guidelines This command must be used in conjunction with the random-detect-group command.
Additionally, the dscp command is available only if you specified the dscp-based argument when using
the random-detect-group command.
Table 2 lists the DSCP default settings used by the dscp command including the DSCP value, and its
corresponding minimum threshold, maximum threshold, and mark probability. The last row of the table
(the row labeled “default”) shows the default settings used for any DSCP value not specifically shown
in the table.
Examples The following example enables WRED to use the DSCP value af22. The minimum threshold for the
DSCP value af22 is 28, the maximum threshold is 40, and the mark probability is 10.
Router> enable
Router# configure terminal
Router(config)# random-detect-group class1 dscp-based
Router(cfg-red-group)# dscp af22 28 40 10
Router(cfg-red-group)# end
Table 2 dscp Default Settings
DSCP
(Precedence)
Minimum
Threshold
Maximum
Threshold
Mark
Probability
af11 32 40 1/10
af12 28 40 1/10
af13 24 40 1/10
af21 32 40 1/10
af22 28 40 1/10
af23 24 40 1/10
af31 32 40 1/10
af32 28 40 1/10
af33 24 40 1/10
af41 32 40 1/10
af42 28 40 1/10
af43 24 40 1/10
cs1 22 40 1/10
cs2 24 40 1/10
cs3 26 40 1/10
cs4 28 40 1/10
cs5 30 40 1/10
cs6 32 40 1/10
cs7 34 40 1/10
ef 36 40 1/10
rsvp 36 40 1/10
default 20 40 1/10