Specifications

B-47
Cisco MWR 2941 Mobile Wireless Edge Router Software Configuration Guide, Release 12.2(33)MRB
OL-21227-02
Appendix B Cisco MWR 2941 Router Command Reference
clear ethernet cfm errors
clear ethernet cfm errors
To clear continuity check error conditions logged on a device, use the clear ethernet cfm errors
command in privileged EXEC mode.
Note Release 12.2(33)MRA supports the Draft 1.0 version of Ethernet CFM; it does not support the IEEE
802.1ag-2007 version.
Cisco pre-Standard Connectivity Fault Management Draft 1.0 (CFM D1)
clear ethernet cfm errors [domain domain-name | level level-id]
CFM IEEE 802.1ag Standard (CFM IEEE)
clear ethernet cfm errors [domain-id {mac-address domain-number | domain-name | dns
dns-name | null}] [service {ma-name | ma-num | vlan-id vlan-id | vpn-id vpn-id}]
Syntax Description
Command Default The error database is unchanged; existing entries remain in the database.
Command Modes Privileged EXEC (#)
domain (Optional) Clears errors for a maintenance domain.
domain-name (Optional) String of a maximum of 154 characters.
level (Optional) Clears errors for a maintenance level.
level-id (Optional) Integer in the range of 0 to 7 that identifies the maintenance level.
domain-id (Optional) Clears errors by domain ID.
mac-address (Optional) MAC address of the maintenance domain.
domain-number (Optional) Integer in the range of 0 to 65535.
dns (Optional) Specifies a domain name service (DNS).
dns-name (Optional) String of a maximum of 43 characters.
null (Optional) Indicates there is not a domain name.
service (Optional) Specifies a maintenance association within the domain.
ma-name (Optional) String that identifies the maintenance association.
ma-num (Optional) Integer that identifies the maintenance association.
vlan-id (Optional) Specifies a VLAN.
vlan-id (Optional) Integer from 1 to 4094 that identifies the VLAN.
vpn-id (Optional) Specifies a virtual private network (VPN).
vpn-id (Optional) Integer from 1 to 32767 that identifies the VPN.