Specifications

A-54
Cisco MWR 2941 Mobile Wireless Edge Router Software Configuration Guide, Release 12.2(33)MRB
OL-21227-02
Appendix A Sample Configurations
Sample Configurations
ip address 1.1.1.3 255.255.255.0
!
Cisco Networking Services (CNS) Zero Touch Deployment Configuration
The following configuration example sets the Cisco MWR 2941 to boot using configurations stored on
a CNS–CE server with the IP address 30.30.1.20. For more information about configuring CNS, see
Configuring Cisco Networking Services (CNS), page 4-115.
Note This section provides partial configurations intended to demonstrate a specific feature.
hostname 2941
!
cns trusted-server all-agents 30.30.1.20
cns event 30.30.1.20 11011 keepalive 60 3
cns config initial 30.30.1.20 80
cns config partial 30.30.1.20 80
cns id hostname
cns id hostname event
cns id hostname image
cns exec 80
logging buffered 20000
!
end
CFM and ELMI Sample Configuration
The following sample configuration uses CFM and ELMI with three inward facing MEPs, two MIPs,
and three maintenance domains.
Note This section provides partial configurations intended to demonstrate a specific feature.
!
ethernet cfm ieee
ethernet cfm global
ethernet cfm traceroute cache
ethernet cfm traceroute cache size 112
ethernet cfm domain CISCO_7 level 7
service L7 vlan 700
continuity-check
!
ethernet cfm domain CISCO_ENG level 6
service ce28 vlan 600
continuity-check
!
ethernet cfm domain CISCO_5 level 5
service L5 vlan 1
continuity-check
!
ethernet lmi global