Specifications

A-48
Cisco MWR 2941 Mobile Wireless Edge Router Software Configuration Guide, Release 12.2(33)MRB
OL-21227-02
Appendix A Sample Configurations
Sample Configurations
address-family ipv4 vrf customer_a
redistribute connected
neighbor 100.1.1.2 remote-as 101
neighbor 100.1.1.2 update-source Loopback1
neighbor 100.1.1.2 activate
no synchronization
exit-address-family
!
----------------MP-BGP loopback interface ---------------------------------
interface Loopback1
ip address 100.1.1.1 255.255.255.255
!
------------------Core-facing Vlan interface -------------------------------
interface GigabitEthernet0/1
switchport access vlan 20
switchport trunk allowed vlan 1,2,20-23,1002-1005
switchport mode trunk
load-interval 30
!
interface Vlan20
ip address 192.169.10.1 255.255.255.0
load-interval 30
no ptp enable
mpls ip
!
------------------CE-facing Vlan interfaces for 2 customers------------------------------
interface GigabitEthernet0/4
switchport access vlan 100
load-interval 30
duplex full
!
interface Vlan100
vrf forwarding customer_a
ip address 192.169.3.2 255.255.255.0
!
interface GigabitEthernet0/5
switchport access vlan 99
load-interval 30
duplex full
!
interface Vlan99
vrf forwarding customer_b
ip address 192.169.3.2 255.255.255.0
!
QoS Sample Configurations
The following sample configurations demonstrate how you can apply QoS configurations on the Cisco
MWR 2941.
Note This section provides partial configurations intended to demonstrate a specific feature.
The following sections provide sample configurations for QoS on the Cisco MWR 2941.
• Switchport Priority
• Classification and Marking
• Priority Queuing