Specifications

A-47
Cisco MWR 2941 Mobile Wireless Edge Router Software Configuration Guide, Release 12.2(33)MRB
OL-21227-02
Appendix A Sample Configurations
Sample Configurations
route-target import 192.168.2.1:200
!
address-family ipv4
exit-address-family
!
-------------------Loopback addresses for 2 customers-----------------------------------
interface Loopback100
vrf forwarding customer_a
ip address 192.169.1.3 255.255.255.255
!
interface Loopback101
vrf forwarding customer_b
ip address 192.168.100.1 255.255.255.255
!
------------------------Core-facing OSPF instance----------------------------
router ospf 1
log-adjacency-changes
network 100.0.0.0 0.255.255.255 area 0
network 192.168.0.0 0.0.255.255 area 0
network 192.169.0.0 0.0.255.255 area 0
!
----------------------VRF OSPF instances for 2 customers -------------------------------
router ospf 100 vrf customer_a
router-id 192.168.1.3
log-adjacency-changes
redistribute bgp 101 metric-type 1 subnets
network 192.168.0.0 0.0.255.255 area 0
network 192.169.0.0 0.0.255.255 area 0
!
router ospf 100 vrf customer_b
router-id 192.168.100.1
log-adjacency-changes
redistribute bgp 101 metric-type 1 subnets
network 192.168.0.0 0.0.255.255 area 0
network 192.169.0.0 0.0.255.255 area 0
!
----------------------MP-BGP with 2 VRF customers ---------------------------------
router bgp 101
bgp router-id 100.1.1.1
bgp log-neighbor-changes
neighbor 100.1.1.2 remote-as 101
neighbor 100.1.1.2 update-source Loopback1
!
address-family ipv4
redistribute connected
neighbor 100.1.1.2 activate
no auto-summary
no synchronization
exit-address-family
!
address-family vpnv4
neighbor 100.1.1.2 activate
neighbor 100.1.1.2 send-community extended
bgp scan-time import 5
exit-address-family
!
address-family ipv4 vrf customer_b
redistribute connected
neighbor 100.1.1.2 remote-as 101
neighbor 100.1.1.2 update-source Loopback1
neighbor 100.1.1.2 activate
no synchronization
exit-address-family
!