Specifications

A-44
Cisco MWR 2941 Mobile Wireless Edge Router Software Configuration Guide, Release 12.2(33)MRB
OL-21227-02
Appendix A Sample Configurations
Sample Configurations
interface Vlan10
ip address 10.10.10.1 255.255.255.0
ip router isis
ip pim sparse-mode
no ptp enable
!
router isis
net 49.0001.1720.1600.9009.00
passive-interface Loopback0
!
ip pim rp-address 6.6.6.1 override
PTP Hybrid Mode
The following section shows a sample PTP configuration that uses hybrid mode. For more information
about how to configure PTP hybrid mode, see Configuring PTP Clocking, page 4-39.
Note This section provides a partial configuration intended to demonstrate a specific feature.
ptp mode ordinary
ptp priority1 128
ptp priority2 128
ptp domain 1
interface Vlan1
ip address 192.168.1.2 255.255.255.0
ptp announce interval 3
ptp announce timeout 2
ptp sync interval -4
ptp delay-req interval -4
ptp slave multicast hybrid
ptp enable
network-clock-select 1 SYNCE 0/1
PTP Hot Standby Master Clock
The following section shows a sample PT P configuration that uses a hot standby master clock. For more
information about how to configure a PTP hot standby master clock, see Configuring PTP Clocking,
page 4-39.
Note This section provides a partial configuration intended to demonstrate a specific feature.
ptp mode ordinary
ptp priority1 128
ptp priority2 128
ptp domain 1
ptp best-recovered-quality 2 30
interface Vlan1
ip address 192.168.1.2 255.255.255.0
ptp announce interval 3
ptp announce timeout 2