Specifications

A-38
Cisco MWR 2941 Mobile Wireless Edge Router Software Configuration Guide, Release 12.2(33)MRB
OL-21227-02
Appendix A Sample Configurations
Sample Configurations
ip igmp static-group 239.193.0.12 source 10.234.45.133
ip igmp static-group 239.193.0.12 source 10.234.45.137
ip igmp static-group 239.193.0.12 source 10.234.45.141
ip igmp static-group 239.193.0.12 source 10.234.45.129
ip igmp query-max-response-time 5
ip igmp query-interval 7
!
ip access-list standard SSM
permit 239.193.0.0 0.0.255.255
permit 239.194.0.0 0.0.255.255
!
ip pim register-source Loopback0
ip pim ssm range SSM
!
For more information about how to configure multicast, see Configuring IP Multicast, page 4-64.
PTP Sample Configurations
The following sections show a sample configurations for PTP. For more information about how to
configure PTP, see Configuring Clocking and Timing, page 4-39.
• PTP Slave Mode with Redundancy
• PTP Redundancy
• PTP Hybrid Mode
• PTP Hot Standby Master Clock
• PTP Input Timing
• PTP Output Timing
PTP Slave Mode with Redundancy
The following configuration implements PTP slave mode and PTP redundancy.
!
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname MWR_2
!
boot-start-marker
boot system flash mwr2941-ipran-mz.ricwest-ptp
boot-end-marker
!
card type e1 0 0
enable secret 5 mysecret
!
no aaa new-model
ip source-route
!
!
ip cef
no ip domain lookup
ip multicast-routing
ptp mode ordinary
ptp priority1 128
ptp priority2 128