Specifications

A-37
Cisco MWR 2941 Mobile Wireless Edge Router Software Configuration Guide, Release 12.2(33)MRB
OL-21227-02
Appendix A Sample Configurations
Sample Configurations
Multicast Sample Configurations
The following sample configurations show how to configure multicast on the Cisco MWR 2941.
Note These sections provide partial configurations in order to demonstrate a specific feature.
• Sparse Mode with a Static Rendezvous Point
• Source-Specific Multicast
Sparse Mode with a Static Rendezvous Point
!
ip multicast-routing
!
interface VLAN2
description Ethernet Backhaul
ip pim sparse-mode
ip pim query-interval 2
ip pim version 2
!
interface VLAN3
description Ethernet Shorthaul
ip pim sparse-mode
ip pim version 2
ip igmp query-max-response-time 5
ip igmp query-interval 7
!
ip pim register-source Loopback0
ip pim rp-address 1.1.1.1 2 override
!
access-list 2 permit 239.193.0.0 0.0.255.255
access-list 2 permit 239.194.0.0 0.0.255.255
!
Source-Specific Multicast
!
ip multicast-routing
!
interface VLAN2
description Ethernet Backhaul
ip pim sparse-mode
ip pim query-interval 2
ip pim version 2
!
interface VLAN3
description Ethernet Shorthaul
ip pim sparse-mode
ip pim version 2
ip pim bsr-border
ip igmp static-group 239.193.0.3 source 10.234.0.125
ip igmp static-group 239.193.0.3 source 10.234.45.133
ip igmp static-group 239.193.0.3 source 10.234.45.137
ip igmp static-group 239.193.0.3 source 10.234.45.141
ip igmp static-group 239.193.0.3 source 10.234.45.129
ip igmp static-group 239.193.0.12 source 10.234.0.125