Specifications

A-23
Cisco MWR 2941 Mobile Wireless Edge Router Software Configuration Guide, Release 12.2(33)MRB
OL-21227-02
Appendix A Sample Configurations
Sample Configurations
Ethernet over MPLS Configuration
The following configuration example shows an Ethernet pseudowire (aka EoMPLS) configuration.
(Figure A-5)
Figure A-5 Ethernet over MPLS Configuration
MWR_A
!
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname mwr_A
!
boot-start-marker
boot-end-marker
!
card type e1 0 0
card type e1 0 1
logging buffered 4096
enable password mypassword
!
no aaa new-model
!
network-clock-select 1 E1 0/0
mmi polling-interval 60
no mmi auto-configure
no mmi pvc
mmi snmp-timeout 180
ip cef
!
no ip domain lookup
ip domain name cisco.com
multilink bundle-name authenticated
mpls label protocol ldp
vpdn enable
!
!
controller E1 0/0
mode aim 1
!
controller E1 0/1
mode aim 1
!
controller E1 0/2
mode aim 1
!
controller E1 0/3
Node-B
MWR_A
20.20.20.1/24 20.20.20.2/24
MWR_B
4.4.4.4 2.2.2.2
RNC
253095
GigabitEthernet0/1 GigabitEthernet0/1
VLAN1 VLAN1