Specifications

A-2
Cisco MWR 2941 Mobile Wireless Edge Router Software Configuration Guide, Release 12.2(33)MRB
OL-21227-02
Appendix A Sample Configurations
Sample Configurations
Pseudowire Configurations
The following sections contain configuration examples for pseudowire connections.
• Asymmetric Pseudowire Configuration
• Pseudowire Redundancy Configuration
• TDM over MPLS Configuration
• ATM over MPLS Configuration
• Ethernet over MPLS Configuration
Note When creating IP routes with a pseudowire configuration, we recommend that you build a route from
the xconnect address (LDP router-id or loopback address) to the next hop IP address , such as
ip route
1.1.1.1 255.255.255.255 1.2.3.4
. For more information about configuring pseudowire, see
Configuring Pseudowire, page 4-73.
Asymmetric Pseudowire Configuration
The following example shows an asymmetric PWE3 configuration (Figure A-1).
Figure A-1 Asymmetric Pseudowire Configuration
MWR_1
version 12.4
service timestamps debug datetime msec localtime
service timestamps log datetime msec localtime
!
hostname MWR1
!
boot-start-marker
boot-end-marker
!
card type e1 0 0
card type e1 0 1
!
!
ip cef
!
!
controller E1 0/0
clock source internal
cem-group 1 unframed
!
controller E1 0/1
clock source internal
GE0/0 (Uplink)
GE0/1 (Downlink)
MWR_1
BTS/Node B
BSC/RNC
MWR_2
AT M
TDM
AT M
TDM
253034