Specifications
4-114
Cisco MWR 2941 Mobile Wireless Edge Router Software Configuration Guide, Release 12.2(33)MRB
OL-21227-02
Chapter 4 Configuring the Cisco MWR 2941 Router Using the CLI
Monitoring and Managing the Cisco MWR 2941 Router
show gsm-abis efficiency [history] History of the GSM efficiency averages for
compression/decompression at 1-second,
5-second, 1-minute, 5-minute, and 1-hour
intervals.
show gsm-abis errors Error statistics counters of the GSM for
compression/decompression.
show gsm-abis packets Packet statistics counters of the GSM for
compression/decompression.
show gsm-abis peering [details] Peering status, statistics, and history of the GSM
compression/decompression.
show interface type slot/port Configuration and status of the specified
interface.
show interface switchport backup Status information about the backup switchport.
show interface virtual-cem slot/port Status of the CEM interface.
show interface gigabitethernet slot/port Status of the FE interface.
show ip mroute Contents of the multicast routing (mroute) table.
Note Multicast routing applies only to PTP
redundancy.
show mpls l2transport vc Information about Any Transport over MPLS
(AToM) virtual circuits (VCs) that are enabled to
route Layer 2 packets on a router.
show network-clocks Network clocking configuration.
show platform hardware Status of hardware devices on the Cisco MWR
2941 router.
show policy-map Configuration of all classes for a specified service
policy map or of all classes for all existing policy
maps.
show policy-map interface Statistics and the configurations of the input and
output policies that are attached to an interface.
show ppp multilink MLP and multilink bundle information.
show ppp multilink interface number Multilink information for the specified interface.
show protocols Protocols configured for the router and the
individual interfaces.
show ptp clock Displays ptp clock information.
show ptp foreign-master-record Displays PTP foreign master records.
show ptp parent Displays PTP parent properties.
show ptp port Displays PTP port properties.
show ptp time-property Displays PTP clock time properties.
show xconnect all xconnect information.
Command Purpose