Specifications

4-107
Cisco MWR 2941 Mobile Wireless Edge Router Software Configuration Guide, Release 12.2(33)MRB
OL-21227-02
Chapter 4 Configuring the Cisco MWR 2941 Router Using the CLI
Monitoring and Managing the Cisco MWR 2941 Router
Saving Configuration Changes
After you have completed configuring your Cisco MWR 2941 router, to prevent the loss of the router
configuration, you must store the configuration changes by saving it to NVRAM so that the router boots
with the configuration you entered.
Step 1 Exit the global configuration mode.
Router(config)# exit
Tip To return immediately to enable mode (Router#), press Ctrl-Z in any mode instead of entering exit,
which returns you to the mode you were in previously.
Step 2 Save the configuration changes to NVRAM so that they are not lost during resets, power cycles, or power
outages.
Router# copy running-config startup-config
Monitoring and Managing the Cisco MWR 2941 Router
The following sections describe how to monitor and manage the Cisco MWR 2941:
• Using Cisco Mobile Wireless Transport Manager (MWTM)
• Enabling Remote Network Management
• Show Commands for Monitoring the Cisco MWR 2941 Router
• Configuring Cisco Networking Services (CNS)
Using Cisco Mobile Wireless Transport Manager (MWTM)
You can use Cisco network management applications, such as Cisco Mobile Wireless Transport
Manager (MWTM), to monitor and manage the Cisco MWR 2941. This Network Management tool
provides monitoring and management capabilities to the RAN-O solution. The Cisco MWTM addresses
the element-management requirements of mobile operators and provides fault, configuration, and
troubleshooting capability. The Cisco MWTM provides the following key features:
• Event Monitoring
• Web-Based Reporting
• Autodiscovery and Topology
• Inventory
• OSS Integration
• Security
• Client/Server Architecture
• Multiple OS Support