Data Sheet

Audio Specifications Value
Audio input level -15 to +15 dBm for 100% level
Audio input impedance 600 Ω balanced or Hi-Z (menu selectable)
Audio common mode hum rejection >40 dB
Frequency response - with dbx (Lor R) ±0.5, 50 Hz to 14.5 kHz, -3 dB @ 15 kHz
Frequency response (SAP) ±1.5 dB (50 Hz to 9 kHz)
S/N ratio (L, R, SAP) >60 dB down (with dbx)
L-R carrier suppression >40 dB
Channel separation - with dbx NTSC (591442, 591443) PAL-N (591444, 591445)
Typical separation >33 dB (50 Hz to 14 kHz) >26 dB (50 Hz to 14 kHz)
Guaranteed separation @ 25°C >30 dB (50 Hz to 14 kHz) N/A
Guaranteed separation over temperature >26 dB (50 Hz to 14 kHz) N/A
range of 0 to +50°C
Total harmonic distortion
Main audio distortion <0.5%
SAP channel
<1% (10 kHz BW)
Calibration Tone 10.396 kHz
4.5 MHz subcarrier output level 40 ±3 dBmV
Video Specification Value
Input level (video loop-through) 0.5 V to 2.0 V p-p
Input impedance Hi-Z
Input return loss (30 Hz to 4.2 MHz) >30 dB (when terminated in 75 Ω)
Horizontal sync lock range ±4 Hz
ENCODER SPECIFICATIONS
General Specifications Value
AC power input 90 to 130 V AC, 50/60 Hz OR
208 to 230 V AC, 50/60 Hz (See Ordering Information)
DC power input -42 to -56 V DC
Power dissipation 25 Watts (AC Powering)
20 Watts (DC Powering)
Operating temperature 0° to 50°C
Shipping weight 15 lbs
Specifications subject to change without notice.
Note: Both AC and DC power inputs are available. Either may be used.