Installation guide

Release Notes for Cisco Voice Interworking Service Module Release 3.0(0)

Part Number OL-2523-01 Rev. B0, January 9, 2004

VISM Features

• Private Network-to-Network Interface Priority Routing

• Additional SPVC Connection Management Capabilities

See the “Software Features Introduced in Software Release 3.0(0) for VISM/VISM-PR” section on

page 3 for more information on these features. Refer to the Cisco VISM Installation and Configuration

Guide for more information on VISM and VISM-PR card installation procedures.

Software Features Introduced in Software Release 3.0(0) for VISM/VISM-PR

New and modified CLI commands allow you to use the following software Release 3.0(0) for

VISM/VISM-PR features in their indicated application modes:

• Call Agent-Controlled VoATM AAL1 and AAL2 SVC, for VoIP

• AAL1 SVC-Based TDM Hairpinning, for VoIP

• High Complexity Codec Support for VISM-PR—G.723.1, for VoIP

• Announcement File System, for VoIP

• Call Agent-Controlled T.38 Fax, for VoIP

• Additional Support for MGCP 1.0, for ATM and VoIP

• RSVP-Based Admission Control, for VoIP

• Clock Slip Counters, for ATM and VoIP

• RTP Connection Statistics, for ATM and VoIP

• CAS Immediate Start and Ground Start Glare Handling, for VoIP

• Grooming for Local Traffic, for VoIP

• MGX 8000 Series Implementation Enhancements:

–

Additional VBR Enhancements, for ATM and VoIP

–

Expanded Clock Source Selection, for ATM and VoIP

–

Private Network-to-Network Interface Priority Routing, for ATM and VoIP

–

Additional SPVC Connection Management Capabilities, for ATM and VoIP

–

192 T1/248 E1 DS0 Support with High Complexity Codecs on VISM-PR, for ATM and VoIP

–

Channel Alarm Enhancement, for ATM and VoIP

–

VISM TDM Line Statistics Collection, for ATM and VoIP

Note Refer to the “Software Release 3.0(0) for VISM/VISM-PR CLI Commands” section on page 23 for

a listing of the new and modified commands for software Release 3.0(0) for VISM/VISM-PR. Refer

to the Cisco VISM Installation and Configuration Guide for a description and usage guidelines for

the new and modified commands.