Installation guide

24
Release Notes for Cisco Voice Interworking Service Module Release 3.0(0)
Part Number OL-2523-01 Rev. B0, January 9, 2004
Important Notes
delannpermanent Deletes a permanent announcement file and its associated codec type
from the announcement file server.
dncon Configures a specified connection down, preventing traffic from being
passed to it.
dspannagetime Displays the time that a nonpermanent announcement is to remain valid
after it is placed into the VISM announcement cache.
dspanncache Displays all available temporary announcement file names, and
associated age times before being refreshed from the announcement file
server.
dspanncontrols Displays a summary list of all provisionable announcement file variables,
including variables associated with all announcement file CLI
commands.
dspanndn Displays the announcement file server domain name.
dspannpathprefix Displays the main prefix directory path from which VISM retrieves
announcement files from the announcement file server.
dspannpermanents Displays all available permanent announcement files with their
associated codec types and identifying index numbers.
dspannprefcodec Displays the codec type used for announcements played on unconnected
TDM endpoints.
dspannreqtimeout Displays the expiration time for announcements to begin playing before
being aborted.
dspdisctimers Displays the Restart in Progress command disconnect type method wait
delay times.
dsprsvpif Displays the RSVP status of a specified connection.
dsprsvpreq Displays the data associated with a specified RSVP request.
dsprsvpreqs Displays all RSVP-known requests on the current VISM card.
dsprsvpresv Displays all data associated with an RSVP bandwidth reservation.
dsprsvpresvs Displays all incoming RSVP-known reservations on the current VISM
card.
dsprsvpsender Displays all data associated with a specified RSVP path state.
dsprsvpsenders Displays all RSVP-known path states on the current VISM card.
dsprtpconnstat Displays the RTP connection statistics for a specified endpoint.
dspslipcnt Displays the current clock slip counters for a specified VISM card line.
upcon Configures a specified connection up, allowing traffic to be passed to the
specified connection.
Table 3 New CLI Commands for Software Release 3.0(0) for VISM/VISM-PR (continued)
Command Description