Installation guide

23
Release Notes for Cisco Voice Interworking Service Module Release 3.0(0)
Part Number OL-2523-01 Rev. B0, January 9, 2004
Important Notes
• trapVismChanFailed
First time using an existing trap. Added varbind: vismChanStatusBitMap. Uses varbind:
genericLineNum, vismCnfChanNum, vismChanPortNum, and vismChanStatusBitMap.
• trapVismConUp
First time using an existing trap. Added varbind: vismChanStatusBitMap. Uses varbind:
genericLineNum, vismCnfChanNum, vismChanRowStatus, and vismChanStatusBitMap.
Software Release 3.0(0) for VISM/VISM-PR CLI Commands
Software Release 3.0(0) for VISM/VISM-PR includes many new, modified, and deprecated command
line interface (CLI) commands. The syntax and use of these commands is described in the Cisco VISM
Installation and Configuration Guide for software Release 3.0(0) for VISM/VISM-PR.
New, Modified, and Deprecated CLI Commands
Table 3 describes the new CLI commands contained in software Release 3.0(0) for VISM/VISM-PR.
Table 3 New CLI Commands for Software Release 3.0(0) for VISM/VISM-PR
Command Description
addannpermanent Configures an announcement server file and associated codec type as
permanent.
clrslipcnt Clears current clock slip counters for a specified VISM card line.
cnfalmcnt Configures the collection of TDM line statistics.
cnfannagetime Configures the time that a nonpermanent announcement is to remain
valid after it is placed into the VISM announcement cache.
cnfanndn Designates an announcement file server domain name.
cnfannpathprefix Designates the main prefix directory path from which to retrieve
announcement files from the announcement file server.
cnfannprefcodec Configures the codec type used for announcements played on
unconnected TDM endpoints.
cnfannreqtimeout Configures the expiration time for announcements to begin playing after
the VISM receives the announcement signal (request) from the call agent.
cnfdisctimers Configures the Restart in Progress command disconnect type method
wait delay times.
cnfmgcgrpprotocol Configures call agent group protocol data.
cnfrsvp Configures RSVP for a specified connection.
cnfrsvprefreshmiss Configures the number of times VISM waits for a missed RSVP soft-state
mechanism refresh message for a specified connection.
delannalldynamic Deletes all announcement files and their associated codec types from the
temporary announcement files currently saved in the VISM card.
delanndynamic Deletes an announcement file and associated codec type from the
temporary announcement files currently saved in the VISM card.