Installation guide

Release Notes for Cisco Voice Interworking Service Module Release 3.0(0)

Part Number OL-2523-01 Rev. B0, January 9, 2004

Important Notes

This section describes the following elements of software Release 3.0(0) for VISM/VISM-PR:

• “VISM Management Information Base” section on page 13

• “Software Release 3.0(0) for VISM/VISM-PR CLI Commands” section on page 23

• “VISM Redundancy” section on page 27

• “VISM Call Rate” section on page 27

• “Compatibility” section on page 27

• “Limitations and Restrictions” section on page 30

VISM Management Information Base

The VISM Management Information Base (MIB) Version 0.0.30 is provided with the delivery of

software Release 3.0(0) for VISM/VISM-PR, which bundles with the Cisco MGX 8230, Cisco MGX

8250, and Cisco MGX 8850 software and is located on the Web at the following location:

http://www.cisco.com/kobayashi/sw-center/beta/

When the selected FW *.tar file or FW*.zip file is downloaded, untar or unzip the file and you will find

all the latest MIBs bundled with this release.

The MIB is in standard ASN.1 form and can be compiled with most standards-based MIB compilers.

Refer to the MIB release notes on CCO.

MIB Changes for Software Release 3.0(0) for VISM/VISM-PR

This section describes new, modified, and deprecated MIB objects, and new and modified traps for

software Release 3.0(0) for VISM/VISM-PR.

New MIB Objects

The following MIB objects are added for software Release 3.0(0) for VISM/VISM-PR:

• MIB objects contained in cwAnnounceControlGrp:

–

cwAnnMaximumSize

–

cwAnnFileServerName

–

cwAnnAgeTime

–

cwAnnPreferenceCodec

–

cwAnnPrefixPath

–

cwAnnReqTimeout

• MIB objects contained in cwAnnounceTable:

–

cwAnnounceNumber

–

cwAnnFileStatus

–

cwAnnFileName