Specifications

G-2
Cisco MGX 8800/8900 Series Software Configuration Guide
Release 5.1, Part Number OL-6482-01, Rev. A0, January 25, 2005
Appendix G Reliability, Availability, and Serviceability
Diagnostics
Step 7 Display diagnostics results.
MGX8850.7.PXM.a>dspdiagresults
Table G-1 shows some of the other commands that can be used to isolate and troubleshoot problems. For
details about these commands refer to the Cisco MGX 8800/8900 Series Command Reference, Release
5.1.
Diagnostics Examples
The following example shows the display output for the dspdiagresults command:
MGX8850.7.PXM.a> dspdiagresults
--------------------------------------------------------
Online Diagnostics Test Summary
--------------------------------------------------------
Id Name En #Att #Fail #Pass Alarm Result
-- ---- -- ---- ----- ----- ----- -----
1 Data Path Y 2868 0 2868 None Pass
2 Trap Freq Monitor Y 1434 0 1434 None Pass
3 Memory Access Y 2868 0 2868 None Pass
4 Atlas Reg Access Y 2868 0 2868 None Pass
5 Atlas Sram Access Y 2868 0 2868 None Pass
6 Framer/LIU Access Y 2868 0 2868 None Pass
7 Elmer Access Y 2868 0 2868 None Pass
8 Flash CheckSum Y 2868 0 2868 None Pass
Table G-1 RAS-Related Diagnostics, Alarm, and POST Commands
Command Description
cnfdiag Configures (enables/disables) online diagnostics and schedules offline
diagnostics for a specific slot.
cnfdiagall Configures (enables/disables) online diagnostics and schedules offline
diagnostics for all slots.
dspdiagcnf Displays the configuration of online and offline diagnostics
dspdiagstatus Displays the status of online and offline diagnostics on all slots and indicates
whether diagnostics is ready to be enabled or not.
dspdiagstat Displays the statistics of online and offline diagnostics execution for a specific
slot.
dspdiagerr Displays errors of online and offline diagnostics execution on all slots.
dspdiagtests Displays a list of all diagnostics tests.
clrdiagstat Clears the statistics of executed online and offline diagnostics for a specific slot.
clrdiagerr Clears the errors reported by online and offline diagnostics for a specific slot.
dspdeverr Displays the error types and error counts for a specific device in a slot.
abortofflinediag Stops the currently running offline diagnostics test.
dspdeverrhist Displays the history of error types and error counts for a specific device in a slot.
dspdiagresults Displays the diagnostics test results and alarm conditions for a specific slot.
dsphwalms Displays a summary of errors and alarms for all devices in a slot.
dsppostresults Displays the Power on Self Test (POST) results.