Specifications

E-21

Cisco MGX 8800/8900 Series Software Configuration Guide

Release 5.1, Part Number OL-6482-01, Rev. A0, January 25, 2005

Appendix E Hardware Survey and Software Configuration Worksheets

VXSM Configuration Worksheet

Table E-16 lists general switch parameters you will need to configure on each VXSM card.

Note VXSM cards operate only on MGX 8850 (PXM45) and Cisco MGX 8950 switches. If you are

configuring a MGX 8850 (PXM1E) or Cisco MGX 8830 switch, or if you do not have VXSM cards

installed in your switch, you do not need to fill out Table E-16.

Table E-16 General VXSM Card Configuration Parameters

Feature

Parameter

Information Value to Configure

Slot for this VXSM Slot number

Software Version Data

Boot software Version number

Runtime software Version number

Card Redundancy Options

Standalone configuration Yes or no?

Redundant configuration

Card role Primary or secondary

Card slot for other

half of redundant

card pair

Slot number

APS connector

installed?

Yes or no?

Card SCT SCT number