Specifications

E-11

Cisco MGX 8800/8900 Series Software Configuration Guide

Release 5.1, Part Number OL-6482-01, Rev. A0, January 25, 2005

Appendix E Hardware Survey and Software Configuration Worksheets

AUSM/B Configuration Worksheet

Table E-6 lists general switch parameters you will need to configure on each AUSM/B card.

Note AUSM/B cards operate only on MGX 8850 (PXM1E) and Cisco MGX 8830 switches. If you are

configuring a MGX 8850 (PXM45) or Cisco MGX 8950 switch, or if you do not have AUSM/B cards

installed in your switch, you do not need to complete the worksheet in Table E-6

Table E-6 General AUSM/B Configuration Parameters

Feature

Parameter

Information Value to Configure

Slot for this AUSM/B Slot number

Software Version Data

Boot software Version number

Runtime software Version number

Card Redundancy Options

Standalone configuration Yes or no?

1:N Redundant configuration

Card role Primary or secondary

Card slot for other

half of redundant

card pair

Slot number

Line distribution Mode: back card or

bulk distribution

through an SRM