Specifications

E-5
Cisco MGX 8800/8900 Series Software Configuration Guide
Release 5.1, Part Number OL-6482-01, Rev. A0, January 25, 2005
Appendix E Hardware Survey and Software Configuration Worksheets
General MGX Switch Configuration Worksheet (PXM45, PXM1E, and SRM)
General MGX Switch Configuration Worksheet (PXM45, PXM1E,
and SRM)
Table E-4 lists general switch parameters you can configure in each new switch.
Table E-4 General Switch Configuration Parameters
Feature Parameter Information Value to Configure
Switch name Text
IP Addresses
Boot IP address
information
Primary card address
Secondary card
address
Network mask
Disk or LAN IP address
information
IP address
Network mask
IP address information
for access over ATM
IP address
Network mask
SLIP IP address
information
IP address
Network mask
ATM Address and PNNI Configuration Data
PNNI controller Controller ID 2
Controller type 2 (PNNI)
Controller name
PNNI level and lowest
peer group ID
Refer to the Cisco
PNNI Network
Planning Guide for
MGX and SES
Products.
PNNI node address Refer to the Cisco
PNNI Network
Planning Guide for
MGX and SES
Products.
SPVC prefix Refer to the Cisco
PNNI Network
Planning Guide for
MGX and SES
Products.
MPLS controller Controller ID 3
Controller type 3 (LSC)
Controller name
Administrator data