Specifications
9-94
Cisco MGX 8800/8900 Series Software Configuration Guide
Release 5.1, Part Number OL-6482-01, Rev. A0, January 25, 2005
Chapter 9 Switch Operating Procedures
Managing IMA
The Auto-Restart Mode row displays the mode configured with the cnfimagrp command -mode option,
which is described in the previous section. The Rx IMA ID Expected row displays the far end ID
configured with the cnfimagrp command -rxid option, which is also described in the previous section.
The Auto-Restart Sync State row displays one of the following states:
• disable—Autorestart is disabled for this IMA group.
• loopbackSync—All IMA links in this group are synchronized with an ID that is the same as the near
end ID.
• feSync—At least on IMA link in this group is synchronized with an ID that is the same as the
expected far end ID.
• tempSync—All IMA links in this group are synchronized with an IMA ID, but the ID does not match
the near end ID or the expected far end ID.
• inProgress—Autorestart is enabled, but the IMA group has not yet reached the loopbackSync,
feSync, or tempSync state.