Specifications

9-86
Cisco MGX 8800/8900 Series Software Configuration Guide
Release 5.1, Part Number OL-6482-01, Rev. A0, January 25, 2005
Chapter 9 Switch Operating Procedures
Managing PXM1E and AXSM Card Diagnostics
6 -- --
7 -- --
8 -- --
9 -- --
10 -- --
11 -- --
12 -- --
13 -- --
14 -- --
15 -- --
16 -- --
17 -- --
18 -- --
19 -- --
20 -- --
Type <CR> to continue, Q<CR> to stop: 21 -- --
Enter the dspdiagstat command to display the number of times that the diagnostics has run. The output
shows the number of attempts and the number of failures for both offline and online diagnostics.
Unknown.7.PXM.a > dspdiagstat 7
Slot 7 diagnostics statistics:
online diag attempted = 0x00001a26
online diag passed = 0x00001a26
online diag failed = 0x00000000
offline diag attempted = 0x00000000
offline diag passed = 0x00000000
offline diag failed = 0x00000000
Enter the dspdiagstatus command to display the diagnostics status and role (active or standby) for each
card on the switch. The diagnostics statuses are:
• Idle—Slot is in an idle state because there is no card in the slot, or due to an error.
• Ready—Card is active and ready for diagnostics test.
• Offline—Card is offline.
• Online—Card is online.