Specifications

9-14
Cisco MGX 8800/8900 Series Software Configuration Guide
Release 5.1, Part Number OL-6482-01, Rev. A0, January 25, 2005
Chapter 9 Switch Operating Procedures
Displaying Software Revisions for Cards
The first example, 2.0(1), is for released firmware version 2.0, maintenance release 1. The second
example, 2.0(1.255), is for patch 255 to version 2.0, maintenance release 1. The other examples are for
prerelease firmware. Prerelease firmware does not include patches; the maintenance release number is
increased for each software change.
Table 9-3 shows some example filenames and the correct version numbers to use with the revision
management commands.
Displaying Software Revisions for Cards
This section describes how to display software revision information for the cards in your switch.
Displaying Software Revisions in Use
To display the boot and runtime software version in use on every card in the switch, enter the dsprevs
command as shown in the following example:
M8850_SF.8.PXM.a > dsprevs
M8850_SF System Rev: 05.00 Oct. 25, 2004 20:22:08 GMT
MGX8850 Node Alarm: CRITICAL
Phy. Log. Inserted Cur Sw Boot FW
Slot Slot Card Revision Revision
Table 9-3 Determining Firmware Version Numbers from Filenames
Filename
Version Number for Revision
Management Commands
ausm_8t1e1_020.000.001.047.fw 20.0(1.47)
axsm_002.000.001.001.fw 2.0(1.1)
axsm_002.000.016-D.fw 2.0(16)D
cesm_8t1e1_020.000.001.047.fw 20.0(1.47)
frsm_8t1e1_020.000.001.047.fw 20.0(1.47)
frsm_vhs_020.000.001.047.fw 20.0(1.47)
mpsm_t1e1_030.000.000.000.fw 30.0(0.0)
pxm1e_003.000.000.000_bt.fw 3.0(0.0)
pxm1e_003.000.001.000_bt.fw 3.0(1.0)
pxm1e_003.000.001-D_mgx.fw 3.0(1)D
pxm1e_003.000.014-A1_bt.fw 3.0(14)A1
pxm45_002.000.000.000_bt.fw 2.0(0.0)
pxm45_002.000.001.000_bt.fw 2.0(1.0)
pxm45_002.000.001-D_mgx.fw 2.0(1)D
pxm45_002.000.014-A1_bt.fw 2.0(14)A1
vism_8t1e1_003.000.000.103-I.fw 3.0(0.103)