Specifications

8-46
Cisco MGX 8800/8900 Series Software Configuration Guide
Release 5.1, Part Number OL-6482-01, Rev. A0, January 25, 2005
Chapter 8 Managing PNNI Nodes and PNNI Routing
Displaying Node Configuration Information
The significant information that will display is as follows:
• Node index
• Node name
• Node level (56 for all nodes until multiple peer groups are supported)
• Restricted transit—a flag that can prevent PNNI routing from transmitting this node
• Branching restricted—a flag that can prevent cpu-intensive branching at this node
• Admin status—up/down
• Operational status—up/down
• Nontransit for PGL election—a flag that indicates that node’s level of eligibility as a PGL
• Node id—The 22-byte PNNI logical identification
• ATM address
• pg id—Peer group ID
The following example shows the report for this command:
mgx8830a.1.PXM.a > dsppnni-node
node index: 1 node name: Geneva
Level............... 56 Lowest.............. true
Restricted transit.. off Complex node........ off
Branching restricted on
Admin status........ up Operational status.. up
Non-transit for PGL election.. off
Node id...............56:160:47.0091810000000030ff0fef38.0030ff0fef38.01
ATM address...........47.0091810000000030ff0fef38.0030ff0fef38.01
Peer group id.........56:47.00.9181.0000.0000.0000.0000.00
mgx8830a.1.PXM.a >
Displaying the PNNI Summary Address
Use the dsppnni-summary-addr command to display PNNI summary addresses as follows:
mgx8830a.1.PXM.a > dsppnni-summary-addr [node-index]
If you specify the node-index, this command displays the summary address prefixes of the node-index
PNNI node.
If you do not specify the node-index, this command displays summary address prefixes for all local
nodes on network.
Table 8-16 shows the objects displayed for the dsppnni-summary-addr command.
Table 8-16 Objects Displayed for dsppnni-summary-addr Command
Parameter Description
node-index The node index number assigned to a PNNI logical node on a network. Replace
[node-index] with a number in the range from 1 to 65535.
addressprefix The ATM address prefix assigned to the network.
prefixlength The length of the summary address-prefix in number of bits, equal or less than 152 bits.
Currently, the zero-length summary address is not supported.
-type The type of the summary address.