Specifications

8-43
Cisco MGX 8800/8900 Series Software Configuration Guide
Release 5.1, Part Number OL-6482-01, Rev. A0, January 25, 2005
Chapter 8 Managing PNNI Nodes and PNNI Routing
Managing Connection Grooming
28.1 no all 60 anytime all
7:2.11:11 no all 60 anytime all
7:2.12:12 no all 60 anytime all
The next example shows the dsprteoptcnf command display for a specific port.
PXM1E_SJ.7.PXM.a > dsprteoptcnf 7:2.12:12
Route Optimization Configuration:
---------------------------------
Percentage Reduction AW CBR: 30
Percentage Reduction AW RTVBR: 30
Percentage Reduction AW NRTVBR: 30
Percentage Reduction AW ABR: 30
Percentage Reduction AW UBR: 30
Percentage Reduction CTD CBR: 30
Percentage Reduction CTD RTVBR: 30
Percentage Reduction CDV CBR: 30
Percentage Reduction CDV RTVBR: 30
Absolute Cost AW CBR: 0
Absolute Cost AW RTVBR: 0
Absolute Cost AW NRTVBR: 0
Absolute Cost AW ABR: 0
Absolute Cost AW UBR: 0
Absolute Cost CTD CBR : 0
Absolute Cost CTD RTVBR : 0
Absolute Cost CDV CBR: 0
Absolute Cost CDV RTVBR: 0
Port Enable VPI/VCI Range Interval Time Range Weekday(s)
7:2.12:12 no all 60 anytime all
Displaying Nodal Grooming Configuration Parameters
To display nodal grooming configuration parameters, enter the dspndrteopt command as shown in the
following example:
PXM1E_SJ.7.PXM.a > dspndrteopt
Nodal Route Optimization Parameters:
------------------------------------
Orderly Grooming Feature: Enabled
Orderly Grooming Batch Size: 20
Orderly Grooming Timeout: 300
Trunk Util Threshold Percent: 85
Soft Reroute: Enabled
Displaying Grooming Configuration Statistics
To display the current grooming statistics, enter the dsprteoptstat command as shown in the following
example:
PXM1E_SJ.7.PXM.a > dsprteoptstat
Route Optimization Status:
----------------------------------
Req=Requests, Eval=Evals, Att=Attempts
Orderly Grooming: Rrt=Reroutes, Tme=TimedOuts, Can=Cancels
Soft Reroute: Att=Attempts, FIc=Failed Incumbent, Lcb=Late CallBk
Rrt=Reroutes, FRr=Failed Rerouting, Lrl=Late Release
Orderly Grooming Soft Reroute
---------------- ----------------
Port Status Req Eval Att Rrt Tme Can Att FIc Lcb
Rrt FRr Lrl