Specifications

7-20
Cisco MGX 8800/8900 Series Software Configuration Guide
Release 5.1, Part Number OL-6482-01, Rev. A0, January 25, 2005
Chapter 7 Managing Service Class Templates
Managing PXM1E Port SCTs
Port SCT COSB Parameters (dspportsct cosb)
The following report appears when you enter the dspportsct cosb command:
M8830_CH.1.PXM.a > dspportsct cosb 1
+-------------------------------------------------------------+
| Service Class Template [ 6] : COSB Parameters |
| Major Version [ 1] : Minor Version [ 0] |
+-------------------------------------------------------------+
|COSB| MIN-RATE| MAX-RATE| EXCESS | CELL DISC | ERS |CLR|
|NUM | | |PRIORITY| ALARM | | |
+-------------------------------------------------------------+
| 1 | 0 | 1000000 | 0 | DISABLED | DISABLED | 6|
| 2 | 0 | 1000000 | 2 | DISABLED | DISABLED | 6|
| 3 | 0 | 1000000 | 2 | DISABLED | DISABLED | 6|
| 4 | 0 | 1000000 | 0 | DISABLED | DISABLED | 10|
| 5 | 0 | 1000000 | 1 | DISABLED | DISABLED | 8|
| 6 | 0 | 1000000 | 1 | DISABLED | DISABLED | 6|
| 7 | 0 | 1000000 | 2 | DISABLED | DISABLED | 6|
| 8 | 0 | 1000000 | 2 | DISABLED | DISABLED | 6|
| 9 | 0 | 1000000 | 2 | DISABLED | DISABLED | 6|
| 10 | 0 | 1000000 | 2 | DISABLED | DISABLED | 6|
| 11 | 0 | 1000000 | 2 | DISABLED | DISABLED | 6|
| 12 | 0 | 1000000 | 2 | DISABLED | DISABLED | 6|
| 13 | 0 | 100000 | 2 | DISABLED | DISABLED | 6|
| 14 | 0 | 100000 | 2 | DISABLED | DISABLED | 6|
| 15 | 6 | 1000000 | 2 | DISABLED | DISABLED | 6|
| 16 | 0 | 1000000 | 0 | DISABLED | DISABLED | 6|
+------------------------------------------------------------+
GCRA1_PLCY Generic Cell Rate Algorithm – Bucket 1 policy.
Note If UPC-Enable is set to disabled, the configured policy is
ignored and no cells are discarded or tagged.
The following parameter values indicate how cells that fail the first
bucket of the policer are handled:
• DISCARD = Discard cell
• SET_CLP = Set CLP bit in cell
• SET_CLP_DISC_TAGD = Set CLP of untagged cells, discard
tagged cells.
GCRA2_PLCY Generic Cell Rate Algorithm – Bucket 2 policy.
Note If UPC-Enable is set to disabled, the configured policy is
ignored and no cells are discarded or tagged.
The following parameter values indicate how cells that fail the second
bucket of the policer are handled:
• DISCARD = Discard cell
• SET_CLP = Set CLP bit in cell
• SET_CLP_DISC_TAGD = Set CLP of untagged cells, discard
tagged cells.
Table 7-9 SCT General Parameter Descriptions (continued)
Parameter Description