Specifications
7-11
Cisco MGX 8800/8900 Series Software Configuration Guide
Release 5.1, Part Number OL-6482-01, Rev. A0, January 25, 2005
Chapter 7 Managing Service Class Templates
Managing SCTs
Step 6 To verify that the new SCT version has been applied to the appropriate card, enter the dspcd command.
Step 7 To verify that a new port SCT is in use on a card, enter the dspportsct gen <port> command.
Deleting a Registered SCT
When you delete a registered SCT, the SCT is removed from the list of available SCTs and the switch.
The SCT is no longer available to cards that match the SCT card type.
Note You cannot simply use the addsct command to add a previously deleted SCT. To add a previously
deleted SCT, you must transfer the appropriate SCT file to the switch and then register the SCT.
To delete a registered SCT file from the switch, use the following procedure:
Step 1 Establish a CLI management session at any user access level.
Step 2 Enter the dspscts command to display the registered SCTs and the parameters you will need when
deleting an SCT.
Step 3 At the PXM prompt, enter the delsct <card type> <sct type> <sctid> <major ver> command, as shown
in the following example:
M8830_CH.2.PXM.a > delsct pxm1e 1 5 1
Warning: this SCT may be in use on the service modules or the PXM1E. Please verify SCT
usage on these cards by using the "dspports"
Do you want to proceed (Yes/No) ? y
Table 7-4 describes the parameters for the delsct command.
Step 4 Enter the dspscts command to ensure that the proper SCT was deleted from your network.
Table 7-4 delsct Command Parameters
Option Description
card type Identifies the type of card the SCT runs on. The possible card types are as follows:
• AXSM = axsm or 1
• AXSME = axsme or 2
• AXSM-16-155-XG = axsmxg or 5
• FRSM-12-T3E3 = frsm12 or 4
• MPSM-T3E3-155 = mpsm155 or 6
• MPSM-16-T1E1 = mpsm16
• PXM1E = pxm1e or 3
sct type Specifies whether the SCT is a port SCT or a card SCT.
sct id Specifies the SCT ID number to be deleted.
major ver Specifies the major version number of the SCT to be deleted.