Specifications

5-14
Cisco MGX 8800/8900 Series Software Configuration Guide
Release 5.1, Part Number OL-6482-01, Rev. A0, January 25, 2005
Chapter 5 Preparing SRM Cards for Communications
Linking Service Module Lines to SRM Channels, VTs, or VCs
Step 3 Enter the dsplink <LogicalSRMslot.Line> command to verify your configuration. Replace
<LogicalSRMslot.Line> with the slot number of the SRM card and the line number you wish to view. In
the following example, the user displays the configuration for line 1 on the SRM card represented by
logical slot 15.
M8850_LA.8.PXM.a > dsplink 15.1
Line Num VtNum RowStatus TargetSlot TargetSlotLine FramingType
======== ====== ========== ========== ============== ===========
1 1 Add 14 1 Not Appl
1 2 Add 14 2 Not Appl
1 3 Add 14 3 Not Appl
1 4 Add 14 4 Not Appl
1 5 Add 14 5 Not Appl
1 6 Add 14 6 Not Appl
1 7 Add 14 7 Not Appl
1 8 Add 14 8 Not Appl
Table 5-7 shows the correlation between VTs, virtual tributary groups (VTGs), and SRM link numbers
when a SRME or SRME/B line is configured for the SONET line type.
Table 5-7 SRM SONET Virtual Tributary Mapping
SRME Link
Number VTG No. VT No.
SRME Link
Number VTG No. VT No.
1 1143 13
2 2144 23
3 3145 33
4 4146 43
5 5147 53
6 6148 63
7 7149 73
8 1250 14
9 2251 24
10 3252 34
11 4253 44
12 5254 54
13 6255 64
14 7256 74
15 1357 11
16 2358 21
17 3359 31
18 4360 41
19 5361 51
20 6362 61
21 7363 71