Specifications
4-6
Cisco MGX 8800/8900 Series Software Configuration Guide
Release 5.1, Part Number OL-6482-01, Rev. A0, January 25, 2005
Chapter 4 Preparing Service Modules for Communication
Managing Firmware Version Levels for Service Modules
26 26 CESM_8T1/B 22.0(28.17)A 1.0(2.0)
27 27 MPSM-16-T1E1-PPP 5.0(29.102)A 5.0(29.102)A
28 28 MPSM-8T1-FRM 30.0(28.17)A 30.0(28.17)A
29 29 --- --- 1.0(2.0)
30 30 CESM_8E1 22.0(28.17)A 1.0(2.0)
31 31 SRM_3T3 --- ---
32 31 SRM_3T3 --- ---
M8850_SF.8.PXM.a >
Step 2 To see the software revision levels for a single card, enter the dspversion command as follows:
8850_NY.1.AXSM.a > dspversion
Image Type Shelf Type Card Type Version Built On
---------- ---------- ---------- ------------ ------------
Runtime MGX AXSM 2.1(0) Feb 13 2001, 07:47:35
Boot MGX AXSM 2.1(0) -
Step 3 Another way to see the software revision levels for a single card is to enter the dspcd command as
follows:
M8850_LA.7.PXM.a > dspcd 1
M8850_LA System Rev: 02.01 Sep. 27, 2001 20:38:48 PST
MGX8850 Node Alarm: NONE
Slot Number: 1 Redundant Slot: NONE
Front Card Upper Card Lower Card
---------- ---------- ----------
Inserted Card: AXSM_4OC12 SMFIR_2_OC12 SMFIR_2_OC12
Reserved Card: AXSM_4OC12 SMFIR_2_OC12 SMFIR_2_OC12
State: Active Active Active
Serial Number: SAK0350007N SAK0346003F SBK0406001V
Prim SW Rev: 2.1(60) --- ---
Sec SW Rev: 2.1(60) --- ---
Cur SW Rev: 2.1(60) --- ---
Boot FW Rev: 2.1(60) --- ---
800-level Rev:
800-level Part#: 800-05774-05 800-05383-01 800-05383-01
CLEI Code: BAA1BADAAA 0000000000 BAI9ADTAAA
Reset Reason: On Power up
Card Alarm: NONE
Failed Reason: None
Miscellaneous Information:
Type <CR> to continue, Q<CR> to stop:
Step 4 Using the dsprevs and dspcd commands, complete the hardware and software configuration worksheet
in Table E-6.
Step 5 Compare the versions you noted in Table E-6 with the latest versions listed in the release note
documents:
• Release Notes for Cisco MGX 8850 (PXM1E/PXM45), Cisco MGX 8950, and Cisco MGX 8830
Switches, Release 5.1.00
• Release Notes for the Cisco MGX 8880 Media Gateway, Release 5.0.02
Step 6 If the switch requires software updates, upgrade the software using the instructions in Appendix A,
“Downloading and Installing Software Upgrades.”