Specifications

3-72
Cisco MGX 8800/8900 Series Software Configuration Guide
Release 5.1, Part Number OL-6482-01, Rev. A0, January 25, 2005
Chapter 3 Provisioning PXM1E Communication Links
General PXM1E Configuration Procedures
-lpcr addcon, cnfcon Local peak cell rate (PCR). Specifies the PCR from a local
endpoint to a remote endpoint. PCR is the maximum cell rate
for the connection at any time. Supported ranges:
OC3: 50 – 353207 cps
T3: 50 – 96000 (PLCP) cps or 104268 (ADM) cps
E3: 50 – 80000 cps
T1: 50-3622 cps
E1: 50-4528 cps
-rpcr addcon, cnfcon Remote peak cell rate (PCR). Specifies the PCR from a
remote endpoint to a local endpoint. PCR is the maximum
cell rate for the connection at any time. Supported ranges:
OC3: 50 – 353207 cps
T3: 50 – 96000 (PLCP) cps or 104268 (ADM) cps
E3: 50 – 80000 cps
T1: 50-3622 cps
E1: 50-4528 cps
-lscr addcon, cnfcon Local sustained cell rate (SCR). Specifies the SCR from a
local endpoint to a remote endpoint. SCR is the maximum
cell rate that a connection can sustain for long periods.
Supported ranges:
OC3: 50 – 353207 cps
T3: 50 – 96000 (PLCP) cps or 104268 (ADM) cps
E3: 50 – 80000 cps
T1: 50-3622 cps
E1: 50-4528 cps
-rscr addcon, cnfcon Remote sustained cell rate (SCR). Specifies the SCR from a
remote endpoint to a local endpoint. SCR is the maximum
cell rate that a connection can sustain for long periods.
Supported ranges:
OC3: 50 – 353207 cps
T3: 50 – 96000 (PLCP) cps or 104268 (ADM) cps
E3: 50 – 80000 cps
T1: 50-3622 cps
E1: 50-4528 cps
Table 3-17 Parameters for the addcon and cnfcon Commands (continued)
Parameter Commands Description