Installation guide

9
Release Notes for the Cisco WAN Manager, Release 15.3.00 P1
OL-11190-01, Rev. C0
Supported Hardware
Supported Hardware
The following subsections list all of the hardware that CWM 15.3.00, Patch 1 supports. You can access
BPX, IGX, and MGX switch documentation at this website:
http://www.cisco.com/en/US/products/hw/switches/tsd_products_support_category_home.html
See also these sections:
• Releases Supported by CWM 15.3.00, Patch 1, page 2
• Releases Certified for CWM 15.3.00 P1, page 22
New Hardware Supported by CWM 15.3.00, Patch 1
No new hardware has been added in the CWM 15.3.00, Patch 1 release.
Existing Hardware Supported by CWM 15.3.00, Patch 1
The tables on the following pages list the hardware that CWM 15.3.00, Patch 1 supports. Table 8
provides an index of the table numbers that apply to particular platforms.
Automated Bulk
Provisioning
Automated Bulk
Provisioning Software CD
This CD must be ordered separately from the
CWM set.
Cisco WAN
Modeling Tools
Cisco WAN Modeling
Tools Software CD
This CD must be ordered separately from the
CWM set.
Table 7 CWM and Associated Software (continued)
Software and
Documentation CD Notes
Table 8 Index of Hardware Tables
Platform Series Table and Page No.
IGX 8400 Table 9 on page 10
BPX 8600 Table 10 on page 10
MGX 8220 Table 11 on page 11
MGX 8230 (PXM1) Table 12 on page 12
MGX 8250 (PXM1) Table 13 on page 13
MGX 8850 (PXM1) Table 14 on page 14
PXM1E on MGX 8830, 8830/B, 8850, and 8850/B Table 15 on page 15
MGX 8830/B (PXM 45/C) Table 16 on page 17
PXM45 on MGX 8850 and 8850/B Table 17 on page 18
MGX 8880 (PXM45/C) Table 18 on page 20
MGX 8950 (PXM45) Table 19 on page 20
SES PNNI Controller Table 20 on page 21