Specifications

Contents
vi
Cisco MGX 8850 (PXM45) and MGX 8950 Software Configuration Guide
Release 3, Part Number 78-14788-01 Rev. C0, January 2004
Establishing Redundancy Between Two Lines with APS 3-19
Adding Intracard APS Lines 3-19
Adding Intercard APS Lines 3-21
CHAPTER 4 Preparing FRSM12 Cards and Lines for Communication 4-1
Configuration Quickstart 4-1
Managing Firmware Version Levels for FRSM12 Cards 4-2
Locating Cards that Need the Firmware Version Set 4-2
Initializing FRSM12 Cards 4-4
Verifying Card Firmware Version Levels 4-4
Establishing Redundancy Between Two FRSM12 Cards 4-6
Selecting and Viewing Service Class Templates 4-7
Selecting a Card SCT 4-7
Selecting a Port SCT 4-8
CHAPTER 5 Preparing RPM-PR Cards for Operation 5-1
Configuration Quickstart 5-1
Locating RPM-PR Cards in the Switch 5-2
Understanding dspcds and dspcd Displays for RPM-PR 5-2
Initializing RPM-PR Cards 5-3
Verifying the Software Version in Use 5-7
Establishing Redundancy Between Two RPM-PR Cards 5-7
Configuring SNMP on the RPM-PR Card 5-9
Where to Go Next 5-10
CHAPTER 6 Managing PNNI Nodes and PNNI Routing 6-1
Managing PNNI Nodes 6-1
Creating Upper Level Peer Groups 6-1
Enabling and Disabling Routes Through a Node 6-4
Enabling and Disabling Point-to-Multipoint Routes 6-5
Adding an ATM Summary Address Prefix 6-5
Configuring SVCC RCC Variables 6-6
Configuring Routing Policies for Background Routing Tables 6-6
Configuring PNNI Timers 6-7