Specifications

8-12
Cisco MGX 8850 (PXM45) and MGX 8950 Software Configuration Guide
Release 3, Part Number 78-14788-01 Rev. C0, January 2004
Chapter 8 Switch Maintenance Procedures
Decommissioning an RPM Slot
Decommissioning an RPM Slot
To decommission an RPM slot, you must remove all configuration items you configured for that card.
You can do this by entering each command in the startup-config file with the key word no in front of it.
These configuration items are described in the Cisco MGX 8850 Route Processor Module Installation
and Configuration Guide.