Specifications

7-99
Cisco MGX 8850 (PXM45) and MGX 8950 Software Configuration Guide
Release 3, Part Number 78-14788-01 Rev. C0, January 2004
Chapter 7 Switch Operating Procedures
Diagnostics Support MGX 8850 and MGX 8950 Switches
Enter the dspdiagstat command to display the number of times that the diagnostics has run. The output
shows the number of attempts and the number of failures for both offline and online diagnostics.
Unknown.7.PXM.a > dspdiagstat 7
Slot 7 diagnostics statistics:
online diag attempted = 0x00001a26
online diag passed = 0x00001a26
online diag failed = 0x00000000
offline diag attempted = 0x00000000
offline diag passed = 0x00000000
offline diag failed = 0x00000000
Enter the dspdiagstatus command to display the diagnostics status and role (active or standby) for each
card on the switch. The diagnostics statuses are:
• Idle—Slot is in an idle state because there is no card in the slot, or due to an error.
• Ready—Card is active and ready for diagnostics test.
• Offline—Card is offline.
• Online—Card is online
Unknown.7.PXM.a > dspdiagstatus
Slot State Role
---- ----- ----
1 Idle UNKNOWN CARD ROLE
2 Idle UNKNOWN CARD ROLE
3 Idle UNKNOWN CARD ROLE
4 Idle UNKNOWN CARD ROLE
5 Idle UNKNOWN CARD ROLE
6 Idle UNKNOWN CARD ROLE
7 Ready ACTIVE CARD ROLE
8 Idle UNKNOWN CARD ROLE
9 Idle UNKNOWN CARD ROLE
10 Idle UNKNOWN CARD ROLE
11 Idle UNKNOWN CARD ROLE
12 Idle UNKNOWN CARD ROLE
13 Idle UNKNOWN CARD ROLE
14 Idle UNKNOWN CARD ROLE
15 Ready ACTIVE CARD ROLE
16 Idle UNKNOWN CARD ROLE
17 Idle UNKNOWN CARD ROLE
18 Idle UNKNOWN CARD ROLE
19 Idle UNKNOWN CARD ROLE
20 Idle UNKNOWN CARD ROLE
Type <CR> to continue, Q<CR> to stop: